S/V Ripple

Sailing up the channel to Ketchikan. The cruise ships are visible before the town is June 13, 2015 Well, this is awkward.  Two days before a scheduled crew change, I have a serious mechanical problem on the boat, with no clue how difficult it will be to fix it. There isn't going to be any problem getting Mathias back to Ketchikan by the 15th, but Wes is scheduled to arrive that same day, and who knows what will happen? The previous evening I had managed to get off a few texts by standing on deck and holding my phone as high as I could reach. I thought about sticking it a pelican box and hoisting it up a halyard, but there was no real urgency. We left the mooring ball in Alava Bay at 0415, trying to make use of as much of the flood tide as we could to help push us up to Ketchikan. Before we could avail ourselves of that flood, we had to get past it, as it was not only flooding towards Ketchikan, but up Behm and into Alava Bay. So, it was slow going for a bit at 2 knots. A...

The Princess Bay excursion boat approaching us for the transfer of hydraulic fluid June 12, 2015 We left our anchorage at Manzanita Bay at the late hour of 0815.  We had planned on a leisurely exploration of Rudyerd Fjord with no particular destination in mind.  Three full days remained to us before Mathias's flight out of Ketchikan, and we would not have to push very hard to get there. The barometer was at its highest point of the trip, and broken cloud coverage promised a partly sunny day for our tour of Rudyerd Fjord. It became immediately evident that the thrust available from the engine and drivetrain were less than half of normal. Full throttle resulted in between 2 and 2.5 knots. Alarming. But the engine was running smoothly throughout its operating range. No parasitic oscillation, no strange sounds. If anything, it was smoother than normal. Puzzling. You can't hit a log or a rock with a propeller turning at 2500 RPM and not know it, right? We hadn't.  No s...